Boat Outfitting

AG118 Pedestal Guard 

Single Bend AngleGuard 9.5″ Wide by 1.25″ diameter for all SailPods and SystemPods.

Features:

• 316 grade stainless steel
• 065 gauge wall thickness
• Mirror polished finish
• All 1.25” include stainless steel feet (1” does not include feet)

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

PowerPod Pre-Cut for Garmin GPSMAP® 923, 923xsv, 943 & 943xsv

PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.

PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.

NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.

Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.

All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.

PowerPods: Protection, Convenience, Security.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SailPod Pre-Cut for Raymarine Axiom 12 & Axiom+ 12 for 12″ Wide Guard (Pre-Cut for Surface Mount Using Rear Mounting Brackets)

SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your fingertips… “Where you need it when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.

Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!

Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SailPod Uncut Usable Face 15.18″w x 9.85″h (38.6cm w x 25cm h) for Garmin GPSMAP® 1223/1243xsv - 9.5″ Wide Guard

SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your fingertips… “Where you need it when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.

Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!

Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SailPod Pre-Cut for Garmin 8612xsv/8412xsv for 9.5" Wide Guard

SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips… “Where you need it, when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.

Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!

Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Cut/Uncut: Cut
• Mounting Style: Pedestal
• Box Dimensions: 8"H x 12"W x 17"L WT: 5.4 lbs
• UPC: 659988120356

Quick Guide (pdf)

RailMount Pre-Cut for Simrad NSS9 evo3/B & G Zeus3 9 Fits 1" or 1.25" Tubing

RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1” or 1.25” diameter tube. A Nickel Chrome-Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.

RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.

Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!

Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Cut/Uncut: Cut
• Mounting Style: Rail
• Box Dimensions: 8"H x 12"W x 17"L WT: 6.7 lbs
• UPC: 659988114393

Quick Guide (pdf)

PowerPod Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022

PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.

PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.

NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.

Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.

All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.

PowerPods: Protection, Convenience, Security.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Mounting Style: Dash
• Cut/Uncut: Cut
• Box Dimensions: 9"H x 15"W x 17"L WT: 6.5 lbs
• UPC: 659988114294

PowerPod Pre-Cut for Simrad NSS12 evo³ & B&G Zeus³ 12

PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.

PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.

NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.

Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.

All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.

PowerPods – Protection, Convenience, Security.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Cut/Uncut: Cut
• Mounting Style: Dash
• Box Dimensions: 9"H x 15"W x 17"L WT: 7.85 lbs
• UPC: 659988114331

SailPod Pre-Cut for Simrad NSS12 evo³ & B&G Zeus³ 12 for 9.5" Wide Guard

SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it”. Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.

Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!

Commitment to Quality
We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Cut/Uncut: Cut
• Mounting Style: Pedestal
• Box Dimensions: 8"H x 11"W x 17"L WT: 5.8 lbs
• UPC: 659988113785

SailPod Pre-Cut for Raymarine AXIOM 9 f/12″ Wide Guard

SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it”. Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.

Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!

Commitment to Quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Cut/Uncut: Cut
• Mounting Style: Pedestal
• Box Dimensions: 8"H x 11"W x 16"L WT: 5.8 lbs
• UPC: 659988114591

SailPod Pre-Cut f/Raymarine AXIOM 9 f/9.5" Wide Guard
(Pre-Cut is for Surface Mount using rear mounting brackets)

GP1800 Series for 9.5" Guard, SailPods are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen.  A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.

Gen3 Family Features
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. For 2015 we have re-designed and re-tooled all of the popular NavPods. We have reviewed all of the former products and selected the best design elements of each and incorporated them in every new Gen3 product.

Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Cut/Uncut: Cut
• Mounting Style: Pedestal
• Box Dimensions: 7"H x 10"W x 14"L WT: 3.8 lbs
• UPC: 659988114539

SuperSailPod Uncut f/4 Instruments & Up To A 9" MFD f/12" Wide Guard

Super SailPod Series is used for mounting 8" and 9" Chartplotters plus 4 instruments. The Super SailPod needs an angle flat length of at least 15"

All SailPod's Include:

• Acrylic capped ABS plastic
  
• Chromed stainless steel tamper-proof fasteners and wrench
  
• Double seal for watertight integrity
  
• Models are available pre-cut for popular electronics
  
• Stainless steel mounting hardware and mounting gaskets

Sizing Chart:
Top

• Usable Face: 9"H x 13"W x 5.25"D
  
• Max Cut-Out: 9"H x 10.5"W

Bottom:

• Usable Face: 4.5"H x 20.25"W x 2.5"D
  
• Max Cut-Out: 4.5"H x 20.25"W

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Cut/Uncut: Uncut
• Mounting Style: Pedestal
• Usable Face: 13"W x 9"H (Upper Section); 20.25"W x 4.5"H (Lower Section)
• Box Dimensions: 9"H x 19"W x 24"L WT: 11.1 lbs
• UPC: 659988105193

PED5100-01 PedestalPod Pre-Cut for Humminbird HELIX 10 & HELIX 9 Series - Carbon Black

PedestalPods are better than bracket mounting. Very sturdy and secure yet clean and attractive, this mount protects your fishfinder/chartplotter from the harshest wet boating conditions. PedestalPods also allow you to easily reach and control the fishfinder/chartplotter while providing added security and protection from theft.

PedestalPods position your fishfinder/chartplotter at 20" off the deck, located near the bow, and at a 45° angle for easy viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom, or even control the trolling motor.

PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.

Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.

NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.

There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Cut/Uncut: Cut
• Mounting Style: Deck
• Box Dimensions: 10"H x 17"W x 28"L WT: 8 lbs
• UPC: 659988113372

GP1600 SystemPod Uncut for 9.5" Wide Guard

GP1600 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.

A SystemPod is best mounted on a Single Bend AngleGuards.

SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.

Usable Face: 19.75"W x 6"H

All SystemPods include

• Acrylic capped ABS plastic
• Chromed stainless steel tamper-poof fasteners
• Double seal for watertight integrity
• Models are available pre-cut for popular electronics
• Stainless steel mounting hardware and mounting gaskets

*See Literature tab for an image with dimensions

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Usable Face: 19.75"W x 6"H
• Mounting Style: Pedestal
• Cut/Uncut: Uncut
• Box Dimensions: 7"H x 12"W x 22"L WT: 6.8 lbs
• UPC: 659988108071

Quick Guide (pdf)

GP1301 InstrumentPod Precut w/3-3.6" Holes f/9.5" Guard

NavPod's InstrumentPod GP1301 for 9.5" Guard is used for mounting three instruments in a single NavPod at the helm or companionway.

An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway.

All InstrumentPods Include:

• Acrylic capped ABS plastic
  
• Chromed stainless steel tamper-proof fasteners
  
• Double seal for watertight integrity
  
• Models are available pre-cut for popular electronics
  
• Stainless steel mounting hardware and mounting gaskets

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Cut/Uncut: Cut
• Mounting Style: Pedestal
• Box Dimensions: 6"H x 8"W x 18"L WT: 4 lbs
• UPC: 659988107838

AG27 9.5" Wide AngleGuard - Double Bend - 1" Diameter

Part #: AG27

NavPod Protects Your Electronics In Harsh Conditions

InstrumentPods and SailPods can be mounted together on a double bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.

Sailpod sold separately 

Features:

• 9.5" Center to Center
• 1" Diameter Double Bend
• 10" Angled Flat Length
• 8" Upper Vertical Flat Length

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

AG18 9.5" Wide AngleGuard - Single Bend - 1" Diameter

Part #: AG18

NavPod Protects Your Electronics In Harsh Conditions

InstrumentPods and SailPods can be mounted together on a single bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.

Sailpod sold separately 

Features:

• 1" Diameter Single Bend
• 9.5" Center to Center
• 12" Angled Flat Length

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

AG218 12" Wide AngleGuard - Single Bend - 1.25" Diameter

Part #: AG218

NavPod Protects Your Electronics In Harsh Conditions

InstrumentPods and SailPods can be mounted together on a single bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.

Sailpod sold separately 

Features:

• 1.25" Diameter Single Bend
• 12" Angled Flat Length
• 1.25" Tubing Diameter
• 12" Center to Center
• All 1.25” include stainless steel feet (1” does not include feet)

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Part #: TPK300

NavPod Protects Your Electronics In Harsh
Conditions

Tamper-Proof Wrench Set

Available in 2.5", 6" and 6" T Handle.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

PART #:	GP1040
Description:	Uncut (usable face = 17.5"w x 7.375"h)
W x H x D:	20.25" x 9.5" x 6.125"

NavPod Protects Your Electronics In Harsh Conditions

Un-Cut NavPods are for you to choose your own layout or for mounting electronics that NavPod doesn't provide a Pre-Cut for. The face of the NavPod can easily be cut with a "Rotozip". It's a small handheld router style cutter that shreds the material while cutting. This eliminates any melting of the plastic material. It is also important to note that when selecting a possible Un-cut NavPod, the depth measurement stated in the chart is overall outside measurement. Actual internal clearance can be reduced by curvature from the design or molded indents for the mounting system. This can reduce the overall and needs to be considered when making a determination of actual available depth clearance.

Watertight Silicone Seal
Keeps rain and salt water spray off electrical connections on the back of electronics

Tamperproof
Special fasteners and wrench are included that provide security and convenience to leave electronics on-board

Concealed Wiring
No loose wires are exposed to corrosion and UV damage

Clean Installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-Cut Models
Come with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Usable Face: 17.5"W x 7.35"H
• Mounting Style: Pedestal
• Cut/Uncut: Uncut
• Box Dimensions: 8"H x 12"W x 23"L WT: 6.9 lbs
• UPC: 659988102574

PART #:	TP125
Description:	Top Plate Adaptor for 1.25" AngleGuard on Edson Steering System
W x H x D:	9.5" x 9.5" x 1.25"

NavPod Protects Your Electronics In Harsh Conditions

Top Place Adaptor

NavPod AngleGuards are designed to upgrade sailboat steering systems to accommodate mounting of electronics onto NavPods.

Edson is a popular manufacturer of steering systems who has always used a 9.5" wide pedestal guard. Most of their pedestal guards are 1" in diameter. Lewmar (formally Whitlock) also has manufactured steering systems that use the 9.5" wide format. NavPod supplies the SG10 and AG10 as a easy retrofit onto either of these systems.

Because of the clean and secure method of concealing wires and the need to accommodate large connectors and heavy radar cables within the Stainless Steel tubes, NavPod recommends the larger 1.25" diameter AngleGuards. Often the existing Top Plate needs to be bored out or replaced with the TP125 to accommodate the larger diameter. NavPod supplies Polished Stainless Steel feet with all 1.25" AngleGuards.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.