62 Series Marine Carbon Monoxide Alarm - 24V Flush Mount - Black

Features:

• NMMA Listed Component.


• Space-saving design works in the harsh marine environment.


• Works in extreme temperatures. Only marine CO alarm listed to operational temperatures of -40F to 158F. Alarm has consistently held up in the excessive cold and heat due to high quality sensor.


• No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available.


• Low Current Draw (37 mA). Innovative micro current circuit saves battery power for the boater.


• Alarm Mute with Auto Reset. With the press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO.


• End of Life Signal alerts the boater to replace the alarm after 5 years of service.


• Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.


• Rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain.

Specifications:

• Conforms To ANSI / UL STD 2034*


• * Testing Laboratory: ETL/Intertek


• Alarm Point: 400 PPM 4-15 Minutes


• Low voltage power warning at 7 Volts


• Power Supply and Current Draw: 37 mA @ 13.8 VDC


• Operational Range: 13.8 Volts +/-15%


• Low voltage power warning at 7 Volts


• Operating Temperature: -40F to +158F


• Case Size: 4.5W x 3.25H x 1.25D